diff --git a/src/components/production/WorkerScreen/InspectionInputModal.tsx b/src/components/production/WorkerScreen/InspectionInputModal.tsx
index d2443877..32b7109a 100644
--- a/src/components/production/WorkerScreen/InspectionInputModal.tsx
+++ b/src/components/production/WorkerScreen/InspectionInputModal.tsx
@@ -753,20 +753,50 @@ export function InspectionInputModal({
     if (useTemplateMode && templateData?.template) {
       return computeDynamicJudgment(templateData.template, dynamicFormValues, workItemDimensions);
     }
-    // 절곡 7개 제품 전용 판정
+    // 절곡 7개 제품 전용 판정 (절곡상태 + 측정값 허용오차 검증)
     if (isBendingProcess) {
       let allGood = true;
       let allFilled = true;
-      for (const p of bendingProducts) {
+      const LENGTH_TOLERANCE = 4;  // 길이 허용오차 ±4mm
+      const GAP_TOLERANCE = 2;     // 간격 허용오차 ±2mm
+
+      for (let pIdx = 0; pIdx < bendingProducts.length; pIdx++) {
+        const p = bendingProducts[pIdx];
+        const def = effectiveProductDefs[pIdx];
+        if (!def) continue;
+
+        // 절곡상태 불량 → 즉시 fail
         if (p.bendingStatus === 'bad') return 'fail';
         if (p.bendingStatus !== 'good') { allGood = false; allFilled = false; }
         if (!p.lengthMeasured) allFilled = false;
+
+        // 길이 측정값 허용오차 검증
+        if (p.lengthMeasured && def.lengthDesign && def.lengthDesign !== '-' && def.lengthDesign !== 'N/A') {
+          const design = parseFloat(def.lengthDesign);
+          const measured = parseFloat(p.lengthMeasured);
+          if (!isNaN(design) && !isNaN(measured) && Math.abs(measured - design) > LENGTH_TOLERANCE) {
+            return 'fail';
+          }
+        }
+
+        // 간격 측정값 허용오차 검증
+        for (let gi = 0; gi < (def.gapPoints?.length || 0); gi++) {
+          const gapMeasured = p.gapMeasured[gi];
+          const gapDesign = def.gapPoints[gi]?.design;
+          if (gapMeasured && gapDesign) {
+            const design = parseFloat(gapDesign);
+            const measured = parseFloat(gapMeasured);
+            if (!isNaN(design) && !isNaN(measured) && Math.abs(measured - design) > GAP_TOLERANCE) {
+              return 'fail';
+            }
+          }
+        }
       }
       if (allGood && allFilled) return 'pass';
       return null;
     }
     return computeJudgment(processType, formData);
-  }, [useTemplateMode, templateData, dynamicFormValues, workItemDimensions, processType, formData, bendingProducts]);
+  }, [useTemplateMode, templateData, dynamicFormValues, workItemDimensions, processType, formData, bendingProducts, effectiveProductDefs]);
 
   // 판정값 자동 동기화 (이전 형식 데이터 로드 시 첫 번째 동기화 건너뜀)
   useEffect(() => {